Are you tired of staring at the same bland walls in your home or office? Do you crave a change but don't want to commit to permanent wallpaper? Look no further than Paperskin! Our removable wallpaper options allow you to switch up your wall decor with ease and without damaging your walls.
But, how do you install removable wallpaper like a pro? Don't worry, we've got you covered with this DIY guide.
Step 1: Measure your walls. You'll need to determine the length and width of the wall to figure out how much wallpaper you'll need. Don't forget to add a little extra for trimming and matching up patterns. Each roll is 27inches wide, so you will have to divide your wall width to 27inches! :)
Step 2: Prepare the wall. Ensure the wall is clean, smooth, and dry. Remove any nails or screws and fill any holes or cracks. Get rid of any dust on the wall with clean wet cloth!
Step 3: Your wallpaper will be market with numbers. Please follow the guid and start sticking your wallpaper to the wall one roll by one. Leave a little extra at the top and bottom to trim later (5"-10").
Step 4: Starting at the top of the wall, peel off the backing and apply the wallpaper to the wall. Be sure to smooth out any air bubbles or wrinkles as you go.
Step 5: Match up the pattern. If you have a patterned wallpaper, you'll need to match up the pattern as you go. Take your time and be patient.
Step 6: Trim the excess. Once you've applied the wallpaper to the entire wall, trim any excess at the top and bottom with a sharp blade.
Voila! You now have a beautifully decorated wall without any commitment. If you ever decide to switch up your decor again, simply peel off the wallpaper and start fresh.
At Paperskin, we offer a variety of removable wallpaper options, from bold prints to subtle textures. Browse our collection and start your DIY project today!